
Top 10 Ao Smith Motor 9721 Wire
Nowadays, there are so many products of ao smith motor 9721 wire in the market and you are wondering to choose a best one.You have searched for ao smith motor 9721 wire in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ao smith motor 9721 wire which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
536 reviews analysed
1. Century formerly AO Smith GF2054 1/2 hp, 1725 RPM, 115 volts, 48/56 Frame, ODP, Sleeve Bearing Belt Drive Blower Motor
2. Marathon B208 Blower Belted Motor, 48Y Reversible Frame, 1/2 hp, 115V, 1725 RPM
3. Dayton 4K259 Motor, 1/2 hp, 60Hz, Belt, Degrees_Fahrenheit, to Volts, Amps, (
4. 1/2 hp 1725rpm 56 Frame TEFC (Farm Duty) 115/208-230 volts Leeson Electric Motor # 110086
Description
General Purpose Farm Duty Motor, 1/2 HP
5. A1730, 1/2 HP Condenser Fan Motor 1075RPM
Feature
- 1/2HP Outdoor Condenser Fan Motor, 208-230 volt, 1075 RPM, 3.5AMP
- Capacitor (not included): 10 MFD/370V
- Replaces: AOS Century FSE1056S, Emerson: 1862, MARS 10730, Fasco D907, GE/Genteq 3730, Packard 43730, Rheem Protech W51-12CJA1-01, Carrier RCD: P257-8730, York Source 1: S1-FHM3730
- https://youtu.be/VxEcFCR6TkI
- All Angle, ball bearing
- Rheem mounting holes w/screws installed
- Water slinger on shaft
- Thru-bolt or band mounting
- Double full flatted shaft
- Class B insulation
- Single phase, 60 hertz
- Thermal overload protected
- Fan duty, continuous, air over
- Totally enclosed non-ventilated
- 36 inch leads
- Directly from Broad-Ocean, one of the top 3 leading HVAC motor manufacturers. You will find them on millions of HVAC units including Carrier, Goodman, Trane and other brands
- If you are a distributor, please continue your normal channel to source Broad-Ocean motors. Thank you. This retail venue is for contractors, repair technicians, and do-it-yourselfers, who otherwise may not have been adequately served with Broad-Ocean motors
6. Belt Drive Motor, Split-Phase, 1725 Nameplate RPM, 115 Voltage, Frame 48, 1/2 hp
7. Hallmark Industries MA0505C AC Motor, 1/2 hp, 1725 RPM, 1PH/60 hz, 115/208-230V AC, 56C/ODP, Cap Start, with Foot, SF 1.15, Steel (Pack of 1)
8. Hallmark Industries MA0505A AC Motor, 1/2 hp, 1725 RPM, 1PH/60 hz, 115/208-230V AC, 56C/TEFC, Cap Start, with Foot, SF 1.15, Steel (Pack of 1)
9. BNTECHGO 24 AWG Magnet Wire – Enameled Copper Wire – Enameled Magnet Winding Wire – 1.0 lb – 0.0197" Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors
Feature
- High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!
- Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 24AWG magnet wire is 1.0 pounds(823 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting.
- This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard.
- 24 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0197″for perfect thickness.
- BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire.
Description
BNTECHGO 24 Gauge Enameled Magnet Wire is made of high quality copper and good coating with enamel.Perfect enameled magnet wire for implementing into your science projects/experiments or personal DIY,used by engineers and hobbyists alike!
Product Details
Size: 1.0 lb(823 feet)
Color: Red
Diameter: 0.0197 inches(0.5mm)
Tolerance: +/-0.05mm
Item Weight: 1 item for 1.0 pounds
Gauge: 24AWG
Specification Met: NEMA(NEMA Description: MW-80-C)
Insulation type: Solder able Polyurethane Overcoat
Build: Single Min-Nom
Maximum Resistance At 20℃ Ω/km:74.18
10. BNTECHGO 20 AWG Magnet Wire – Enameled Copper Wire – Enameled Magnet Winding Wire – 4 oz – 0.0315" Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors
Feature
- High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!
- Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 20AWG magnet wire is 4 ounces(80 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting.
- This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard.
- 20 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0315″for perfect thickness.
- BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire.
Description
BNTECHGO 20 Gauge Enameled Magnet Wire is made of high quality copper and good coating with enamel.Perfect enameled magnet wire for implementing into your science projects/experiments or personal DIY,used by engineers and hobbyists alike!
Product Details
Size: 4 oz(80 feet)
Color: Red
Diameter: 0.0315 inches(0.8mm)
Tolerance: +/-0.05mm
Item Weight: 1 item for 4 ounces
Gauge: 20AWG
Specification Met: NEMA(NEMA Description: MW-80-C)
Insulation type: Solder able Polyurethane Overcoat
Build: Single Min-Nom
Maximum Resistance At 20℃ Ω/km:35.17
Conclusion
By our suggestions above, we hope that you can found Ao Smith Motor 9721 Wire for you.Please don’t forget to share your experience by comment in this post. Thank you!